Automatic pvc film vacuum membrane press machine for wood door

Feature:
1. the workbench surface is made of high strength steel plate which is secondary hardening treatment and non-deformation until 200℃ in an hour。

2. There are 1 vacuum pumps and  2  gas holders can vacuumize quickly，the maximum ultimate vacuum is -0.1 mpa.

3. The heating pipes are metal in good quality,reheating by aluminum plate,surrounded by auxiliary heating,evenly, there is not orange peel lines, bubble, etc.in the surface, and heating box uses the sole insulation technology, thermal insulation and prevent accidental burns.

4.This machine is widely used in cabinet doors, wardrobe,wood composite door  etc, can also be used to lamiante sliding door with soft package or wooden veneer (with silicon sheet), especially for hot stamping and heat transfer processing.

Application

The automatic pvc film vacuum press machine intended for laminate doors ,kitchen and furnituremachine intended for laminate doors, different furniture units with PVC films and veneer, with the help of heat and vacuum technique system.
 As result you will receive product with long life use and the same time
 with elegant and inclusive surface.

It is applicable to cover furniture, sound box, cabinets, relief door, decorative panels and all kinds of baroque decorative surfaces with PVC films and natural veneer and hot stamping foils.

Parameters of the automatic pvc film vacuum membrane press machine

Item

HT 2500YM-A2

Dimension(L*W*H)

9900*1950*1700mm

Work table size

2560*1250*60mm *2pcs

vacuum pump

63m³/h *1pcs

Gas holder

2pcs

MAX.vacuum pressure

-0.1mpa(63m³/h)

Total cpower

30KW

Vacuum motor power

3.0KW

Operating power

7.8kw

Weight

1500kg

Minimum Order Quantity

1 set

Heating way

Metal tube heating,reheating by aluminum plate

delivery time

within 25 working days upon recreipt of 50% deposit
or relevant L/C.

terms of payment

30% AS DEPOSIT IN ADVANCE , PAY THE BALANCE BEFORE SHIPPING

 Normal Packing

Free PE film packaging and plywood cases which need additional charge

Vacuum membrane press machine samples

Technology and after sales service of the automatic pvc film vacuum press machine

1)24 months quality guaranty, the machine with main parts(excluding the consumables) 
shall be changed free of charge if there is any problem during the warranty period.      
2 )Lifetime maintenance free of charge.                
3 )Free training course at our plant.                    
4 )We will provide the consumable parts at an agency price when you need replacement.  
5 )24 hours on line service each day, free technical support.        
6 )Machine has been adjusted before delivery.
7 )Our staff can be sent to your company to install or adjust if necessary.